air hose connector

A concise specification and quantity sheet for an air hose connector that belongs on the same request as the hose. Length, end fittings and the applicable SAE/ASTM method are mandatory when the buyer wants comparable factory replies. Budget and supplier preference are optional. This page is a buying checklist, not a life-cycle assessment and not a published carbon roadmap.

Send the sheet

Which air hose connector lines belong on the sheet

  1. Name the connector family: thread, barb, crimped ferrule or a named quick-connect interchange.
  2. Name the hose ID it must match (a 3/8 body with a 1/4 plug is a different request).
  3. State quantity by connector type, not as one lump with the hose metres.
  4. State whether connectors ship loose, crimped at the factory, or as a kit with clamps.

Mandatory

Length of each hose assembly; end fittings or thread; applicable SAE/ASTM (or equivalent) method the factory must cite; working pressure in psi the supplier must confirm; destination.

Optional

Protective wrap, reel, sample-before-lot, budget with currency and unit/order basis, premium / mid-range / budget-friendly preference. Preference is a buyer trade-off, not a rating we verified.

Factory writes back

Invoice description, mapped inquiry form, answers to ID / psi / temperature / ends, packing, origin, Incoterms, and a ship date. Two offers that answer that list can be compared.

Commodity cover versus a named method

A cheap PVC air hose connector kit can be the right buy for intermittent dry shop air. It is the wrong default when the receiving plant will ask for a named SAE method, oil-mist resistance or a lot-level declaration. Engineering-grade compounds cost more per piece; they are not automatically “better” if the duty is a short indoor drop. Write the duty. Do not let a catalogue adjective choose it.

What we will not put on the sheet

No invented MOQ, no site-owned certificate, no percentage against an unnamed market. Thermoplastic versus vulcanized rubber remains the buyer’s call after factories answer compression set, abrasion and coil behaviour against the same length and ID.

Papers to request — not files hosted here

Ask the factory for the current page that names thread or interchange and the hose ID. There is no downloadable PDF on this site.

Working pressure in psi and the SAE/ASTM method, if you required one, must appear on the quoted line. A family brochure does not replace that.

Material declaration and any REACH/RoHS statement belong to the quoted item. Send the request through the inquiry form; we do not host certificates.

Return the sheet with the factory answers filled in

Use the form. Drawings can be described by revision in the requirements box; there is no upload field.

Send Your Requirement Sheet